Ansdimat > Tutorial Lessons

Lesson 1 - Interpretation of Constant Rate Test in confined infinite aquifer using observation borehole hydrograph

This lesson explains, how to start a project and interpret a constant rate pumping test using Theis (1935) solution.

Lesson 1

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 2 - Data input for aquifer test interpretation - Wizard metod

There are two ways to enter data into the ANSDIMAT: wizard input and advanced (manual) input. This lesson will show how to input data using the wizard option, which is the recommended method for beginners. The wizard will guide you through the data input process.

Lesson 2

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 3 - Data input for aquifer test interpretation - Manual metod

This lesson will teach you how to input aquifer testing data in the manual mode. Manual data input is an advanced method that is recommended for more complex conditions (e.g. complex shape of boundaries).

Lesson 3

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 4 - Aquifer test interpretation by graphical methods

This lesson will teach you to interpret the results of an aquifer test using graphical methods.

Lesson 4

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 5 - Interpretation of a step test

This lesson will teach you how to input and interpret data for a step-drawdown test. Step-drawdown tests (or step tests) are often conducted prior to standard constant-rate aquifer tests in order to determine well efficiency and choose the pumping rate for a constant-rate test.

Lesson 5

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 6 - Planning water supply borefield with amwells

This lesson explains how to design a water supply wellfield in an environmentally sensitive area using the AMWELLS module.

Lesson 6

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.


Lesson 7 - Pit dewatering

This lesson will explore how to estimate groundwater inflows to an open pit. You will also learn how to design a dewatering borefield using the AMWELLS module.

Lesson 7

  Tutorial in PDF;      RAW data in EXCEL;      Ansdimat project file.