ANSQUICK > Drawdown during aquifer tests >

Linear source

<< Click to Display Table of Contents >>

Navigation:  Hydrogeologist workbench (ANSQUICK) > Drawdown during aquifer tests >

ANSQUICK > Drawdown during aquifer tests >

Linear source

See section: Linear source (Hantush solution)

 

"Linear source (confined aquifer)" dialog box.

 

Explanatory table

"Q, m^3/day" text box

Constant pumping rate of a well

"t, day" text box

Time for which drawdown is calculated

"s, m" text box

This field shows calculated drawdown. Entering a value in this field re-calculates the pumping rate

"kx, m/day" text box

Horizontal hydraulic conductivity of aquifer

"kz, m/day" text box

Vertical hydraulic conductivity of aquifer

"a, m^2/day" text box

Hydraulic diffusivity of aquifer

"Leaky" option

Leaky aquifer

"B, m" text box

Leaky factor



"Tw, m" text box

Vertical distance from the aquifer top to the screen center of observation well

"lw, m" text box

Length of pumping well screen

"m, m" text box

Aquifer thickness

"Tp, m" text box

Vertical distance from top aquifer to screen center of observation well

"lp, m" text box

Length of observation well screen

"r, m" text box

Distance from the pumping well to an observation well

"Lw, m" text box

Distance from pumping well to boundary

"Lp, m" text box

Distance from observation well to boundary

"L, m" text box

Width of strip-aquifer

"Boundary condition" frame

Boundary conditions

"Pumping well" option

Calculate a drawdown in pumping well. Well capacity is not taken into account

"Tx, m2/day" text box

Horizontal transmissivity of aquifer

"Tz, м^2/day" text box

Vertical transmissivity of aquifer

"S, --" text box

Storage coefficient of aquifer

"Ss, 1/m" text box

Specific storage of aquifer