The hydrogeologist workbench is activated by: "File > Hydrogeologist workbench".
The Hydrogeologist workbench corresponds to the ANSQUICK module and allows simplified assessments of various hydrogeological functions, factors and parameters. For example, the module includes analytical solutions for groundwater mounding and drawdowns in various hydrodynamic conditions.
Menu "Hydrogeologist workbench"
Menu "Drawdown" |
||
Menu "Leaky aquifer"
Menu "Steady-state"
|
Menu "Confined aquifer" |
Calculates drawdown in a confined aquifer |
Menu "Unconfined aquifer" |
Calculates drawdown in an unconfined infinite aquifer |
|
Menu "Leaky aquifer" |
Calculates drawdown in leaky aquifers |
|
Submenu "Leaky aquifer (1)" |
Calculates drawdown in a leaky aquifer with constant head in the adjascent aquifer |
|
Submenu "Leaky aquifer (2)" |
Calculates drawdown in a leaky aquifer with time-vaiable head in the adjascent aquifer |
|
Submenu "Leaky aquifer (3)" |
Calculates drawdown in a leaky aquifer accounting for aquitard storage |
|
Submenu "Pumping from two aquifer (1)" |
Calculates drawdown when the condition "pumping from two aquifers" is selected |
|
Submenu "Pumping from two aquifer (2)" |
Calculates drawdown when the condition "pumping from two aquifers with two wells" is selected |
|
Menu "Two-layer aquifer" |
Calculates drawdown in a two-layer aquifer |
|
Menu "Line source" |
Calculates drawdown in a partially penetrating well in a confined infinite aquifer |
|
Menu "Multilayered systems" |
Calculates drawdown for multy-layer aquifer system that contains 1 to 5 layers. Pumping wells can be located in any or all the layers |
|
Menu "Aquifers and aquicludes" |
Calculates drawdown for multy-layer aquifer system that contains up to 13 aquifers that are separated by aquicludes. A pumping well fully penetrates all the aquifers |
|
Menu "Semi-infinite aquifer" |
Calculates drawdown for semi-infinite aquifers including leaky aquifers and aquifers near river |
|
Menu "Strip aquifer" |
Calculates drawdown for a strip aquifer including leaky aquifers |
|
Menu "Rectangular aquifer" |
Calculates drawdown for a rectangular aquifer |
|
Menu "Circular aquifer" |
Calculates drawdown for a circular aquifer including leaky aquifers and two-layer aquifers |
|
Menu "Constant head test" |
Simplified prediction of drawdown for constant head tests for confined and leaky aquifers |
|
Menu "Steady-state" |
Simplified prediction of steady state drawdowns for pumping tests in various hydrodynamic conditions |
|
Submenu "Pumping near river" |
Calculates drawdown near rivers or under the river floor |
|
Submenu "Dipole test" |
Calculates drawdown in wells when the condition dipole aquifer testing is selected |
|
Submenu "Circular aquifer" |
Calculates drawdown in wells that are located in circular aquifers |
|
Submenu "Areally heterogeneous aquifer" |
Calculates drawdown in wells that are located in areally heterogeneous aquifers |
|
Menu "Well efficiency" |
Calculates well efficiency from step test results |
|
Menu "Slug test" |
Simplified interpretation of slug tests |
|
Menu "Lugeon test" |
Assessment of low permeable fractured rocks - Lugeon's method |
|
Menu "Infiltrometer tests" |
Determines hydraulic conductivity of unsaturated zone based on infiltrometer test results |
|
Menu "Inflow and drains" |
||
|
Menu "Pit inflow" |
Calculates inflow to open pit using "big well" approach |
Menu "Drain holes" |
Calculates inflow to a vertical drain (constant head boundary). This module can also be used to calculate flows and drawdowns for Horizontal Drain Holes |
|
Menu "Trench" |
Calculates inflow to a horizontal drain (constant head boundary) |
|
Menu "Stream-aquifer interactions" |
Calculates drawdown and hydraulic properties for an aquifer near lake/river |
|
Menu "Groundwater mound" |
||
|
Menu "Local Infiltration" |
Calculates groundwater mounding for an infinite aquifer with infiltration |
Menu "Circular aquifer" |
Calculates groundwater mounding for a circular aquifer with infiltration |
|
Menu "Strip aquifer" |
Calculates groundwater mounding for a strip aquifer with infiltration |
|
Menu "Recharge" |
Estimates impact of infiltration on drawdown during aquifer tests |
|
Menu "Radius of influence" |
Estimates radius of influence for slug tests and constant rate tests |
|
Menu "Estimation of parameters" |
||
|
Menu "Transmissivity, storativity" |
|
Menu "Leakage factor" |
Estimates leakage factor based on time to stabilisation and hydraulic diffusivity in leaky aquifers |
|
Menu "Wellbore storage, skin" |
Estimates impact of wellbore storage and skin-effect |
|
