<< Click to Display Table of Contents >> Navigation: Hydrogeologist workbench (ANSQUICK) > Drawdown during aquifer tests > ANSQUICK > Drawdown during aquifer tests >Strip aquifer |
See section: I kind, II kind или для mixed boundary conditions, and leaky.
"Strip aquifer" dialog box.
Explanatory table
"Q, m^3/day" text box |
Constant pumping rate of a well |
"t, day" text box |
Time for which drawdown is calculated |
"s, m" text box |
This field shows calculated drawdown. Entering a value in this field re-calculates the pumping rate |
"I - I" option |
Boundary conditions of the I kind (recharge boundaries) |
"II - II" option |
Boundary conditions of the II kind (no-flow boundaries) |
"I - II" option |
Mixed boundary conditions (recharge an no-flow boundary) |
"k, m/day" text box |
Hydraulic conductivity of aquifer |
"a, m^2/day" text box |
Hydraulic diffusivity of aquifer |
"B, m" text box |
Leaky factor |
"m, m" text box |
Aquifer thickness |
"Steady-state" option |
Steady-state drawdown |
"Leaky" option |
Leaky aquifer |
"Calculate parameter" option |
Calculate hydraulic conductivity by pumping rate and drawdown |
"r, m" text box |
Distance from the pumping well to an observation well |
"Lw, m" text box |
Distance from pumping well to boundary |
"Lp, m" text box |
Distance from observation well to boundary |
"L, m" text box |
Width of strip aquifer |
"T, m^2/day" text box |
Transmissivity of aquifer |
"S, --" text box |
Storage coefficient of aquifer |
"Ss, 1/m" text box |
Specific storage of aquifer |